DESCRIPTION:
Buttonhead bolts upgrade standard Profile 3/8 (10mm) bolts with a smooth, rounded finish.
• Sold in singles
There are three versions of Button Head bolts available:
• A straight 3/8 (10mm) bolt, which will fit 3/8 drop-outs.
• The standard 3/8 (10mm) to 14mm dropouts version
• The peg version, which has a longer 14mm section that’s long enough for both a 14mm peg as well as a 14mm dropout.
There are two versions of Hex Head bolts available:
• A straight 3/8 (10mm) bolt, which will fit 3/8 drop-outs.
• The standard 3/8 (10mm) to 14mm dropouts version
SPECIFICATIONS:
Weight:
- Button Head: 10mm: 33g/1.15oz each
- Button Head: 10mm to 14mm: 36g/1.30oz each
- Button Head: 10mm to 14mm (for pegs): 43g/1.5oz
- Hex Head: 10mm : 37g/1.3oz
- Hex Head: 10mm to 14mm : 41g/1.4oz
- Hex Head: 10mm to 14mm (for pegs) : 25g/1.5oz
*When installing the 14mm peg bolt, make sure the shoulder of the bolt does not protrude past the inside of the drop out. If it does, you might need to add additional washers (see alternative view for proper spacing). Failure to install this bolt properly will result in damage to your hub.
Product Code: 3016
